Gearbox 14:50

Low Cost : Economical and affordable.
Durability : Offers long lasting use.
Light Weight : Provides advantage in terms of weight.

Instructions for Use :

For the best performance of the half inch hex shaft holder, it is recommended to 3D print using PETG or Nylon (PA) filament with 3 walls and 25% fill settings.

After printing is complete :

The Metric 4 nut is inserted into the nut slot.

Metric 4 screws are inserted through the hole on the opposite side.

After the half inch hex is inserted into the shaft, the screw is tightened to the desired hardness.